I am putting my 73 GT6 back together and I don't know where all the vacuum hoses go. If anyone has a 73 (the 72 is different) take a look and let me know where all this stuff goes.
There is one port on the valve cover, one on each carb near the manifold and I think these connect together and go to the canister. There is one port on each carb near the air filter box and two ports on a gadget that taps into the top of the intake manifold. I don't know where these go and I don't know where to take the vacuum for the distributor. I know that there was an antirun on valve that hooks in there some were and one port on the canister goes to the fuel tank vent. All of the canisters I have are three ports on top, but I think that is just the later design and I will block one port. However, I am not sure about that. This thing was already disassembled when I got so I have never seen it put together. I have a lot of books, but none of them tells everything, not even the parts book. The catalogs show the same as the parts book. Pictures would be nice, but I can probably sort it out from a description. Thanks, Sam www.spit6.com /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
