Hi listers, Got a bit of a snag with a heater valve that I purchased awhile back, with other parts from a gent. The valve is pretty, and adjusts easily. Only trouble is, the bits that are used to actually attach the cable weren't included. I didn't realize this until I went to connect the heater cable today. WHOOPS!
I've contacted the seller to see if he still has these bits, but so far, I'm not optimistic. So here's the question. Are these parts available separately from any vendor? Or will I be stuck buying a new heater valve, to replace my nice, shiny second-hand heater valve? Specifically, I need the clamp bracket that holds the cable sheath in place, and the piece that the inner wire fits through and is then tightened down with. If these bits are not available from the usual sources, if anyone could send me a close-up shot of these heater valve bits, either alone or on an installed valve, I'd appreciate it. I can probably fabricate the clamp piece and pick up the other bit at a bicycle shop if I'm lucky. Much obliged! Take care, Jeff McNeal (San Diego) '68 Spitfire Mk3 frame off, bare metal project, aka "Mrs. Jones", ETA January 2003! '70 GT6+ "Accidental", eventual restoration project http://www.TotallyTriumph.net/spitfire/spitfire.shtml Join the TOTALLY TRIUMPH NETWORK! Forums, Photos, How-To's, Classifieds, Links & Triumph Merchandise http://www.TotallyTriumph.net * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
