I will be starting up a rebuilt motor soon. Is 20-50 the correct break in oil? I have a problem with the motor I am rebuilding. The original Stromberg carb shot a stream of gas out of a hole, but ran if some one held a finger on it. I ran a single 40DCOE18 with good results for a very brief period. I then traded the 18 for a 3, so I would have a matched set of webers. I never ran the dual 40DCOE3 setup before I put the motor in the shop. I Began to worry about the initial break in with untried Webers, new cam etc. I bought a pair of SU carbs from John Esposito, $175.00 on ebay, and will run the stock cam till I get the carbs working. The motor will be stock European spec basically. The cylinders will be honed standard size with 9 to 1 pistons. If the SU carbs are totally out of whack and I can't get the damn thing to run initially, will I ruin the cylinders? I am gettig very anxious about this!! Larry
/// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
