I rebuilt and replaced the clutch MC and the slave because of a major loss of fluid at the slave last week. Things went together real well, smothered the seals with grease and refit everything. Did a bench bleed this morning which worked out well.
When I went to reinstall the slave I noticed the pushrod was laying on the bottom of the bracket and there seems to be about 1/2" - 3/4" of horizontal play in it. My pedal goes 1/2 - 2/3 down to the floor until it engages, but very light before that. Time for a new pushrod?, or? If so (I'm leaning that way) what's the best route to take and what else should I look for? TIA Dave Willner 59 TR3A Apple Green 80 Spitfire Carmine Red /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
