I rebuilt mine last summer. There are rubber seals that the reservoir seats in. Possibly those are bad or some other seal/seals in the MC. It was an easy re-build to do - I would recommend trying it yourself.
After I rebuilt mine the reservoir seals leaked for a day or less (I guess they just had to get some fluid on them to loosen them up??) but they sealed up right after that and haven't leaked a drop since. What you describe sounds like the PDWA. Yes, there should be a connection to a warning light. I don't think that the Mk3 had the dual reservoir but I could be wrong. And I'm not sure what model you have. Maybe someone replaced the original with the newer version and there was nothing to connect the PDWA to? Bob > I have what appears to be the dual circuit master with a large clear-ish > plastic reservoir. Is there any cheance that it is just the seal at the > base of the reservoir? Do these go bad commonly? > > I'm used to the single circuit masters - but it looks like there is some > sort of switch or warning light circuit between the two circuits (is this > the PDWA valve I hear about?). But it appears to be disconnected. Is > there supposed to be a lead to a warning light somewhere? - if so it was > long disconnected on mine ! /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
