You might check out http://www.metalshapers.org or the yahoo groups metalshapers, metalshaping and autobodyrepair. Each of them has something about panelbeating. The best book I've found is "The Key to Metal Bumping" by Frank T. Sargent. It's rather old, but quite thorough. IIRC, Eastwood carries it. (certainly others, too.)
HTH Donald. > From: "Geoff Heyland" <[EMAIL PROTECTED]> > Date: Sat, 1 Mar 2003 09:18:53 -0600 > > John Zissler's question sparked one of my own - I hear a lot about hammering > out dents with a hammer and dolly - I've seen dollies, but never seen them in > action. How are you supposed to use dollies to hammer out dents? Do you put > them on the inside of the dent and hammer them, or do you put them on the > outside and hammer from the inside or what? Is there a decent source on the > web that can educate me on this? > > Geoff Heyland > 65 Mark II > 67 Mark II /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
