Then you probably are not completely disengaging. You are just barely disengaging.
You've had some others reply about bleeding, and that's where I too would recommend you check. I'd suggest bleeding at the master cylinder itself, not just at the nipple down on the slave cylinder. Air bubbles rise and are notorious for not wanting to travel all the way down to the slave cylinder to come out. If when you crack the line fitting at the master cylinder you hear a "snap crackle pop" sound, that was the air bubble(s) coming out. Because of the hydraulic nature of the unit, wear, slop and such will not usually cause a problem with inadequate disengagement as the slave cylinder does not retract any further then necessary. >>> "Lambert, Iain" <[EMAIL PROTECTED]> 03/10/03 09:25AM >>> Nolan, My cluch is engaging just as the pedal comes off the floor so what is the different story. /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
