Joe, I agree with what has been suggested using a larger socket to receive a cup being pushed out, and a smaller socket to push on the opposite cup, but I have found that a large vice is both more effective and less violent than bashing away with a sledgehammer.
The ultimate is to combine the methods - use a vice to apply as much load as possible, and if the things still don't move a not-too-large tap with a hammer can give it the final jerk to break loose. You need to tap with the hammer directly on the yoke, so you won't obviously be able to tap in the direction you are loading it - no matter, all the tap does is introduce a shock into the situation which can be all you need to get it to break free. Hope you sort it! Richard & Daffy ---------------------------------------------------------------------- Important Notice: The information in this email is confidential and may be legally-privileged. If you have reason to believe you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it is prohibited and may be unlawful and you are requested to contact the sender urgently and dispose of this email -----------------------------------------------------------exp. /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
