You have heard correct on the X1/9 stuff. There is some bit of modification that need to be done though and it isn't really straight forward.
George. The easiest brake upgrade is to GT6 components. You'll need to swap the entire front upright, which isn't bad because the bearings are slightly larger and the bit in general is beefier. The rears are easy as well, you just need the backing plates and the drums. You would also benefit from switching to the GT6 master cylinder if switching the 4 brakes. I'll be switching to a rear disc setup at the end of the year. Probably won't be using X1/9 stuff, but I'll let the group know how it goes. Aaron Johnson #38 F-Prod Spitfire MkIV - Oregon Region SCCA _________________________________________________________________ /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
