I found the lower clearance on the shorter speedbleeders inconvenient to get a wrench around on the front calipers of my last Mk3 and went with the longer HD's all the way around, this time. They seem to be a closer match to the original bleed screws.
Best wishes, Jeff ----- Original Message ----- From: Richard Gosling To: 'Kashif Ahmad' ; '[EMAIL PROTECTED]' Sent: Friday, April 04, 2003 6:54 AM Subject: RE: It is a long shot - bleed screw sizes and speedbleeders. Kashif, On the advice of another list member, I ordered: Front calipers SB3824L Rear cylinders SB3824HD which fitted just fine. Apparently the guys at Speedbleeder are quite helpful, and very happy to discuss with you which of their sizes would work best. I guess you'll need to tell them thread size and length so they can identify what you need. If you still have the original calipers, try fitting the bleed nipples from those to your Princess calipers - if they fit then you know you can just order the same Speedbleeders as for normal Spit calipers. Richard & Daffy /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
