Quick wiring question for anyone using the older style (black box) crane/allison XR700. By older style I mean the one with the transitor on the outside.
I have two of these that work perfectly, never had a problem, don't expect a problem, but have spares just in case. Problem is, i just cut out my old wiring and I drew up a wiring diagram which stated which wires went to the coil and which was the black box ground, which I have lost. I'm wondering if anyone out there still has one of these lying around or an instruction manual for one. The wire colours are Puple, Black and Red. I've looked at the crane website and found instructions for the new xr700's but they've changed wire colours. My assumption is black to coil -, red is +12v in, and the puple is the common ground, at least that's how I remember writing it down Aaron #38 F-Prod Spit Mk IV Oregon Region _________________________________________________________________ MSN 8 with e-mail virus protection service: 2 months FREE* /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
