>But seriously, have you tried any of that epoxy putty they sell in parts >stores? ******************** If you mean the stuff that is a stick that you break off a portion and knead with your hands, specifically for radiators - yes - i didn't stick well enough either - I just got a hold of some metal epoxy that says it good for 300 degrees - I'm going to try that and see - I figure that maybe its getting too hot and with the expansion coefficient of aluminum vs the epoxy it is either softening or cracking the repair loose - Welding was out because the area was right at the tank where it joins the core, and epoxy of some kind was used to seal the tubes - which would probably burn because of the close proximity to the welded area- Barry Schwartz - San Diego -([EMAIL PROTECTED]) --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.487 / Virus Database: 286 - Release Date: 6/1/03
/// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
