I made a bunch of Blank Off plates and offered them to the list a couple of years ago. I probably have a few left out in the garage. You can have one for free, just pay me for the postage (I think about a $1) I made them out of 7g carbon steel and primed the outside. I know several listers that use them, some even modified them to relieve crankcase pressure and ran a tube to a catch bottle. If there are several of you that want them, I will run another batch.
Let me know, and I will go searching. -Bill -----Original Message----- <SNIP> When installing the pump, you can either get a fuel pump blockoff plate (I've got one from a big block Chevy V8, needs a few minor mods to seal right) or just leave the original pump in place, but plug the output to relieve pressure on the pump arm. /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
