There is an much, much easier way to install both the inside and outside window seals. The first thing is to gather all the clips together in a bunch, make sure you have all of them, then THROW THEM AWAY ! The second thing is to buy a tube of black rtv and 'glue' the seals to the doors. You'll have to improvise a clamping arrangement. I placed the seals with copious amounts of adhesive in the proper locations and pushed a wood strip between them, every few inches, to hold both in place. Worked great !
After painting, I just couldn't bring myself to then scratch the paint off by installing any of the clips typically used on the Spitfire. We spend all this time fighting rust and then scratch off the paint to give it a nice place to start, hmmm ... So everything is 'glued' using rtv, double sided tape or held in place with some other non-intrusive method. Even the rear trim around the tail section, (It's a 1972 MK IV). The last items are the Spitfire MK IV emblems, one one the bonnet, the others on the rear wings. Just picked up some double-sided tape from the local auto paint store. The same tape used to hold on body cladding, the clerk said the emblems would never fall off. Sure hope so. Ken C > What a coincidence...I'm in the process of doing the same thing on my > spitfire. Spent a couple of hours doing the outside seal. /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
