> In my experience, the ballast resister is as Steve describes - but is only > found on earlier models. On later ones, the resistance is built into the > wiring harness under the dash, therefore almost invisible. > > Its function is to apply the full 12 V to the 6V coil during cranking > (higher spark, better starting), and therefore is bypassed when the key is > in the START position. Then the resister is put in series with the coil > when the key is let back to the run position. > Cheers, Fred
/// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
