----- Original Message -----
From: Gary Leroux <[EMAIL PROTECTED]>
> I am re-installing my door panels on my 1970 spit and I have forgotten where the
> springs for the window winder and door handle go. I have installed the panel then
> have added the spring, the bezel and finally the handles but it doesn't look right
> as you can see the springs behind the bezels....is this right? I almost hope so as
> it took me 2 hours of sweating to get everything in place so I could install the
> pins. As usual thanks to all who offer some advice.
Hi Gary,
The correct arrangement is to sit the springs over the spindles with the small end
of the spring nearest the door. The door trim panel goes over the springs so that the
large end of the spring is pushing the trim away from the door. The handles & bezels
(do you have bezels on the 1970 car? It's been a long time....) then go on.
Cheers,
Bill.
--
Rarebits4classics
.......just what you've been looking for
PO Box 1232
Calne
Wiltshire
SN11 8WA
United Kingdom
http://www.rarebits4classics.co.uk
/// [EMAIL PROTECTED] mailing list
/// Send admin requests to [EMAIL PROTECTED]
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
/// Send list postings to [EMAIL PROTECTED]
/// Edit your replies! If they include this trailer, they will NOT be sent.
