Dave, I would suggest that you contact Dan Masters.
I sold Dan a bunch of wire for LBC's. He is actually making harness's for our LBC's. The wire in the Spit's is cheap GPT 16 awg through 10 awg. The battery cables are 4 awg. You need SXL, GXL or TXL wire. Out there on the web under Scions of Lucas is a little wire 101 I did years ago. Take a look at that. The main problem your going to have with the wire is the striped stuff. I sell it but there is a 500ft min per base color with a stripe. Last count your looking at 10 striped wires and the rest are solid color. Good luck -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Mayer Sent: Monday, September 08, 2003 5:30 PM To: [EMAIL PROTECTED] Subject: Wiring Harness Well, Considering ALL of the wire that goes to the back end of my car is completely destroyed, I have decided that i am going to run new wire throughout the whole car. A big job i know, but i think it will pay off in the end. That way i can make sure everything is connected where it needs to be connected, good connectors, make my own color designations, etc. What gauge wire should i use? What is stock for these cars? I am guessing around 14 or 12? I can't imagine that it is too big. Any advice or tips on this job would also be greatly appreciated. Thanks, Dave '68 Spit Mk3 /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
