Hi Everybody, Thanks for all the responses.
I have received several emails regarding my voltmeter reading wrong. All but one suggested the same possible solution. That being I may have hooked the voltmeter up through the voltage regulator. Well, I am glad to say that we all think along the same lines, as that was also my first thought. I guess I should have said that when I checked the reading I hooked my VOM up in the same place as the voltmeter was hooked up. The VOM reads about 2 volts higher than the voltmeter. IIRC the regulator averages about 10v but varies some. But I think my VOM would still show about 10v. The other response suggested there is a resistor that may be adjustable. So I guess I may tear apart the gauge to see what I can see. Thanks, Roger Elliott *** http://www.team.net/the-local *** *** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
