I finally got a break from my two jobs to get some time in on the Spitfire yesterday. Since i just recently installed the new SS brake hoses i needed to bleed the brakes and be done with the brake system. Bled the back no problems. Great! now i go up to the front. I went to loosed the bleed screw...no luck. I remember having the bleed screw loose earlier when i was first strting to work with the brakes...and now the thing is siezed up on me. I soaked it in Liquid Wrench and let it sit for a while, soaked it again, and let it sit, and reapeat. Then i tried to loosen it agian. NO luck. So i soaked it in L.W. over night and tried again this morning. Well...not the results i had sought after. The bleed valve sheered off.
So now i have to drain the brake fluid...again. I have to take apart the caliper...again. and try to see if i can use an easy-out to get the threaded portion of the screw out fo the caliper.
Here are my questions to all of you brake gurus...
1.) If i can get the threaded portion out, what size is that bleed valve? is it possible to pick one up at a local parts store? Otherwise i will have to order it through someone online and wait for it to come in.
2.) If i can't get the threaded portion out, does anyone have an extra brake caliper laying around? Shoudl i replace both calipers? or would i be safe with just one? Again...has anyone had any luck with getting parts like this at a local store or am i gonna have to order it and wait?
Thanks, Dave '68 Spit with no brakes
_________________________________________________________________
Concerned that messages may bounce because your Hotmail account has exceeded its 2MB storage limit? Get Hotmail Extra Storage!
*** http://www.team.net/the-local ***
*** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
