I bought poly bushings, for the a-arms. The metal tube, that fits inside the bushings, is 3/16 inch longer than the stock tube in the rubber bushings.
This made me wonder what the bearing surface should be. The rubber bush is a tight fit and the metal tube will be fixed when the bolt is tightened. will the a-arm move on the rubber or the rubber move on the metal tube or both. When I grind the metal tube for the poly bushings, should it be flush with the poly bushing when fitted to the a-arm? If not, What gap? Do I want the metal tube to be the bearing surface? I think so, but I could be wrong. Larry *** http://www.team.net/the-local *** *** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
