I am starting to clean up the ports on the head from my GT6 project car. I already knew that the engine was a mixed bag of parts because it has an early Plus block (KD53420E), one piston with a part number that doesn't match the other 5 and 3 rods marked #4. It is getting new pistons and will get balanced before it's assembled. The head also seems to have come from somewhere or other. My parts book shows that a Plus engine should have part number 517609 or 517610 head. Mine is clearly marked 517528. Can somebody tell me what it is? Later GT6's were supposed to have heads with larger combustion chambers and used domed pistons. My engine has flat top pistons and the combustion chambers don't seem to be much larger than on a MkI head. Could this possibly be from a TR6 or TR250?
Also, what thickness should I mill the head to to end up with around 10:1 compression? I will be running headers and a Kent road cam and the car lives above 5000' so I can get away with a little extra compression. Thanks, Dave *** http://www.team.net/the-local *** *** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
