While checking out the breaks on my 74 Spitfire, I noticed that the driver's side rotor was not turning freely. It appeared that the rotor was wobbling. In one section, with no break pedal pressure, it was extremely hard to turn the rotor. So, I decided to measure the run out.
Drivers Side Rotor Run out = 0.019 Passenger Side Rotor Run out = 0.004 Could anyone tell me what the acceptable tolerance is? Any opinions as to where the run out is coming from? The previous Owner must have replaced these rotors since they and the break pads do not appear to show any wear. Can the rotors be replaced incorrectly to cause this much movement? Jim K *** http://www.team.net/the-local *** Your messages not reaching the list? Check out http://www.team.net/posting.html *** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
