My first choice would be epoxy. Rakka, West, etc. I learned to love the stuff when building a kayak and use it for all sorts of woodworking projects. Absolutely wonderful stuff.
My second choice would be a polyurethane glue like Gorilla. Beware of the way it foams though. Don't wipe it off! Let it cure and then shave the foamed glue off. My last choice would be contact adhesive. I don't like the lumpy uneven way it applies, and I've never found the stuff to be very strong. Seen far too many pieces of furniture with peeling veneers from a failed contact adhesive joint. >>> Barry Schwartz <[EMAIL PROTECTED]> 05/12/04 10:30AM >>> I am about ready to refinish the dash on the wife's Spitfire resto. I am leaning towards using contact cement(Scotch 90 high strength), but thought I would check to see if anybody has had any experience good or bad with using it, or possibly a suggestion for using something else if that isn't suitable. The dash will still have the original varnish (it won't be removed) but it will be sanded before applying the adhesive. I am adding an oil gauge to the center just because I believe there should have been one originally. It should look really nice when done. The real wood veneer is very thin, approx 1/32nd of an inch thick so I need something that won't bleed through - plus, anybody have a source for white transfer letters??? I used to be able many years ago to buy them but with the advent of computers, transfer type letters are practically obsolete. Barry Schwartz (San Diego) ----------------------------------------------------- The information contained in this communication may be confidential, is intended only for the use of the recipient named above, and may be legally privileged. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication, or any of its contents, is strictly prohibited. If you have received this communication in error, please re-send this communication to the sender and delete the original message and any copy of it from your computer system. Thank you. ----------------------------------------------------- <<<<GWIASIG 0.07>>>> *** http://www.team.net/the-local *** Your messages not reaching the list? Check out http://www.team.net/posting.html *** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
