In message <[EMAIL PROTECTED] cast.net>you write: > >Tried using dupli-color paints, but on my initial tests it just will NOT spray > right. I shake the can religously and keep it at a distance. More paint ends >up on the can and on my fingers than on the object in question. There's the ni >ce light stream, but also shooting gobs of paint at the part, and not making a > nice coat. One exception was when I repainted the sun visor holder arms, whic >h came out nice and smooth. > >Any advice? Or should i look for a new brand of paint here? A bit disconcening >.
Sounds like the nozzle is clogged or not fitted properly. You can put it off and put it back on making sure it is in properly. Or if you have another can, try replacing it. Dave |\ | | | _______________________________________/\ /\ /\_____| \|_____| |____________ Dave Chu \/ \/ | /| | | Dept. of Elec. & Comp. Eng. |/ | | | Concordia University (514)848-2424 Ext.3115 Fax:(514)848-2802 1455 de Maisonneuve W. H961 Email:[EMAIL PROTECTED] Montreal, Quebec, Canada H3G 1M8 http://www.ece.concordia.ca/~dave/addr.html ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ *** http://www.team.net/the-local *** Your messages not reaching the list? Check out http://www.team.net/posting.html *** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
