I have one near Dayton, Ohio anyone is welcome to borrow. Mike Ross
----- Original Message ----- From: "Joe Curry" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Saturday, July 31, 2004 11:43 AM Subject: RE: wheel bearings/tires > John, > As well intentioned as your shop may be, it is very difficult to remove > the hubs without using the proper tool and end up not destroying them. > Normal pullers put too much stress on the hub surfaces and will usually > bend it. > > I'd take it somewhere else just to be on the safe side. There may be > someone in your area that as one of these tools so check your local > resources (clubs, etc) to see if you can find one. > > I have one if you are anywhere close to Southern Arizona. *** http://www.team.net/the-local *** Your messages not reaching the list? Check out http://www.team.net/posting.html *** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
