Martin said: "...I noticed that when I increased the revs both the fuel and temp guage rise quite rapidly, ease off and they drop back..."
Martin, it sounds to me like you still don't have the voltage regulator issue sorted. It is quite to be expected that the voltage from the dynamo will rise and fall with engine speed; the voltage regulator is supposed to sort out this effect, and output a continuous 10V regardless of what they dynamo is doing (as long as it is getting at least 11V or so in). I'd use a voltmeter to find out what voltage you are getting into your gauges before you get any further. Richard Gosling This email and any attached files are confidential and copyright protected. If you are not the addressee, any dissemination of this communication is strictly prohibited. Unless otherwise expressly agreed in writing, nothing stated in this communication shall be legally binding. *** http://www.team.net/the-local *** Your messages not reaching the list? Check out http://www.team.net/posting.html *** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
