Hey Doug, When you take the rack off and try to clean every thing up, so you can put your new gaiters and tie rod ends on, what's the procedure for greaseing the works without a grease zerk on the pinion box?
Larry ----- Original Message ----- From: <[EMAIL PROTECTED]> To: "Larry Vaughan" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Sunday, October 31, 2004 4:45 PM Subject: Re: zerk > I have never found one that matches. If you really must > have a grease fitting there, maybe it would be best to > drill and tap the existing plug for a standard small-size fitting. > > Doug Braun > '72 Spit > > At 03:38 PM 10/31/2004 -0600, you wrote: > >What grease zerk replaces the plug in the steering box cap? '73 and up. NAPA > >couldn't match the plug threads with fine thread or metric nut's, but it > >didn't really matter because they only have coarse thread grease zerks. *** http://www.team.net/the-local *** Your messages not reaching the list? Check out http://www.team.net/posting.html *** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
