Larry,
Some have concerns over alu mounts - as if you hit the wheels on a kerb etc you can kill your rack in one go... so they can be somewhat lethal - depends if you're likely to do that.
I think I am going to go for a stiff polybush... even though I have a set of alu ones in the garage.
James
69 Signal Red Spit
Larry Vaughan wrote:
I just got the new gaiters on the steering rack. I'm surprised the subject never came up before. I greased the rack up, turning it lock to lock, and put a nice blob of grease on both the inner ball joints. By the time I decided the rubber bellows, gaiters, wouldn't stretch over the impeding objects with fingers and a screwdriver, all the grease was on my hands and all the outside surfaces. I cut some plastic strips and made a funnel to get the gaiters on but now it will need more grease.
No one replied to my question about poly steering rack mount bushings versus solid aluminum steering rack mounts. I decided on the poly then changed my mind. After considering the tape and nylon plug situation, I changed my mind about using the aluminum mounts. Now I can't decide.
Larry
*** http://www.team.net/the-local ***
Your messages not reaching the list? Check out http://www.team.net/posting.html
*** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
