Cheers! The old one had a shred but that was at the throttle end so im not sure what had caused that, it wasn't when I owned it! I think there may be an alignment problem so I will have a look. The weather here at the moment means you don't want to do too much on the car! I put a new bumper on at the weekend and I thought my hands were going to fall off! Thanks for your help and I will let you know if I solve it!
Jarrod -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: 26 January 2005 13:28 To: Jones Jarrod JCP Cc: [email protected] Subject: RE: Hello! It could well be that something is out of alignment at the pedal end. Take a flashlight and jam your head where your feet normally go and have a look. The cable should NOT have to bend as it travels from the end of its sleeve at the firewall to the end of the pedal lever. If there is any friction or grinding it will soon break. Whatever caused the old cable to break may quickly ruin the new one, too. Doug At 12:53 PM 1/26/2005 +0000, you wrote: >The one originally on the car snapped so this is a new one. I never had a prob >with the old one although I new it was on the way out. >The cable seems fine when I disconnect it but when I put it back on a can hear >it grinding near the pedal end. Could it be that it is connecting to the pedal >at an angle and grinding due to this? if so could you bend the arm on the >pedal so that they are both on line? That would be strange as I say though cos >I didn't alter anything other than the cable! I will definitely try some >lubrication on it though! > >Jarrod >'77 Spit PLEASE NOTE: THE ABOVE MESSAGE WAS RECEIVED FROM THE INTERNET. On entering the GSi, this email was scanned for viruses by the Government Secure Intranet (GSi) virus scanning service supplied exclusively by Energis in partnership with MessageLabs. Please see http://www.gsi.gov.uk/main/notices/information/gsi-003-2002.pdf for further details. In case of problems, please call your organisational IT helpdesk ----------------------------------------------------------------------- This document is strictly confidential and is intended only for use by the addressee. If you are not the intended recipient, any disclosure, copying, distribution or other action taken in reliance of the information contained in this e-mail is strictly prohibited. Any views expressed by the sender of this message are not necessarily those of the Department for Work and Pensions. If you have received this transmission in error, please use the reply function to tell us and then permanently delete what you have received. Please note: Incoming and outgoing e-mail messages are routinely monitored for compliance with our policy on the use of electronic communications. The original of this email was scanned for viruses by the Government Secure Intranet (GSi) virus scanning service supplied exclusively by Energis in partnership with MessageLabs. On leaving the GSi this email was certified virus-free *** http://www.team.net/the-local *** Your messages not reaching the list? Check out http://www.team.net/posting.html *** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
