All,
Can anyone give me some advice on rod ends?
I want to use them for some adjustable trailing arms on my rotoflex rear
end - and am looking at the loading figures as to what will be best.
They're rated at anything from 5,000lb to 30,000lb - to me 2.3 tons
sounds like a lot of force - and 15 tons sounds wildly excessive - but I
like the idea of over engineering this anyway!
It also seems to me that going up a size from 7/16" to 1/2" (I'm
thinking 1/2 x 5/8) will be better economically - as they are cheaper
yet are able to take more force. Assuming I can just drill out the holes
in the brackets that will work well...
James
69 Rosso Red Spit
Your messages not reaching the list?
Check out http://www.team.net/posting.html
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
=== unsubscribe/change address requests to [EMAIL PROTECTED] or try
=== http://www.team.net/cgi-bin/majorcool
=== Other lists available at
=== http://www.team.net/mailman/listinfo
=== Archives at http://www.team.net/archive
=== http://www.team.net/the-local
=== Edit your replies!
