At 10:36 PM 11/1/2005 +0000, David Mayer wrote: > Well, after searching around for a paint shop that will spray the Spit for >the amount of money i want and being shot down time after time, I have >decided to do more of the body prep work myself than i had originally wanted >to do.
Dave, For starters, body work is very labor intensive, that's why it costs sooo much. > That being said, i was wondering if i could get some lister knowledge on >different body prep techniques. >- Body filler: I only have a couple places that need bondo to smooth them >out (rear end of the rocker panels where the guys welded them in). There is nothing wrong with body filler! It has to be used in many places. That being said, you don't want to have it too deep, like 2" to 4" because someone was too lazy to do some metal beating or cuting and welding. That being said, I usually use dynaglass, a very short haired fiberglass filler for strength, and shaping. It sand very well. Then once everything is looking very good, I use any body filler - something like Ultralyte. When it comes to finishing there is a product called "Icing" that you can use. Each product has it's place. Again, dynaglass for rough work, or building put an edge. Then Bondo to smooth the entire area. Finally Icing to give you a nice top layer. The cost on the various materials varies also. The last quart of dynaglass I purchased cost about $10. A gallon of bondo was about $25 and a tube of Icing is about $25. You might want to read some of the ariticles on my Morgan web page about body work: http://www.team.net/www/morgan/tech/ While some of this info is dated - it is still a good primer. I'm switching the paint's I'm using. I've been a very loyal DuPont person. DuPont now has a product line called Nasson, which is fairly inexpensive compared to the Centari and Chroma lines. For example, I just purchased a gal of Nasson polyeurathine color coat, a gal of reducer, and a quart of hardner for $150 to paint my mini van, as compaired to the color coat for my Bricklin in the Chroma at $250/gal for just the paint. Primers are similarly priced - $100/gal for polyeurathine catalized (2K) primer in the Nasson, vs $150 and up for it in any other line. John T. Blair WA4OHZ email: [EMAIL PROTECTED] Va. Beach, Va (eBay id: zebra48-1) Phone: (757) 495-8229 48 TR1800 48 #4 Midget 65 Morgan 4/4 Series V (B1109) 75 Bricklin SV1 (#0887) 77 Spitfire 71 Saab Sonett III 65 Rambler Classic Morgan: www.team.net/www/morgan Bricklin: www.bricklin.org If you can read this - Thank a teacher! If you are reading it in English - Thank a Vet!! Your messages not reaching the list? Check out http://www.team.net/posting.html === This list supported in part by The Vintage Triumph Register === http://www.vtr.org === unsubscribe/change address requests to [EMAIL PROTECTED] or try === http://www.team.net/cgi-bin/majorcool === Other lists available at === http://www.team.net/mailman/listinfo === Archives at http://www.team.net/archive === http://www.team.net/the-local === Edit your replies!
