In a message dated 11/7/2005 12:51:00 PM Eastern Standard Time, 
[EMAIL PROTECTED] writes:


> Could I have gotten some air in the lines to make the clutch
> slip
> or is the clutch shot? Thanks for any advise.
> 

Greg,
If you have air in the lines the clutch would not disengage properly and you 
would be grinding gears.  If your fluid was low you need to ask yourself where 
it is going?  It may be getting all over the friction disk of the clutch 
which would make it slip a little. Check the slave cylinder, they always leak 
after while. 
Cheers,
Darrell

Your messages not reaching the list?
Check out http://www.team.net/posting.html

===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org

===  unsubscribe/change address requests to [EMAIL PROTECTED]  or try
===  http://www.team.net/cgi-bin/majorcool
===  Other lists available at
===      http://www.team.net/mailman/listinfo
===  Archives at http://www.team.net/archive
===  http://www.team.net/the-local
===  Edit your replies!

Reply via email to