Craig,
You can install GT6 disk brakes on any Spitfire, but you will have to use
the Spindles and Uprights from the same GT6 application as the brakes are.
The calipers will not bolt onto the spitfire uprights.
Joe C.
----- Original Message -----
From: "Creig Houghtaling" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Sunday, November 20, 2005 9:38 PM
Subject: GT6 caliper/rotor on Spitfire
Hi,
I am wondering if anyone has used the GT6 caliper/rotor on an early model
Spitfire. I have a 63 Spitfire/4 (Mk I) with the wider Mk III wheels. I
once read that the GT6 rotors and calipers were larger in diameter and
should have better stopping power. But I have concerns about clearance
with
the older style stock wheels. Does anybody have any experience with this?
Thanks,
Creig Houghtaling
St. Louis, MO
Your messages not reaching the list?
Check out http://www.team.net/posting.html
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
=== Help keep Team.Net on the air
=== http://www.team.net/donate.html
=== unsubscribe/change address requests to [EMAIL PROTECTED] or try
=== http://www.team.net/cgi-bin/majorcool
=== Other lists available at
=== http://www.team.net/mailman/listinfo
=== Archives at http://www.team.net/archive
=== http://www.team.net/the-local
=== Edit your replies!
