yes, the seal can be replaced, the windscreen frame does in fact bolt in from the top and bottom. To reach the bolts and replace the seal at the top the headliner must be out of the way though - which really means that you would be replacing it -as well as the windscreen seal - you might get away with just removing the windscreen and seal, then peeling back the headliner at the front - bottom is the same, that is it bolts in, but the frame will basically have to be removed, so its a job to replace both - BTDT don't want to so it again any time soon :-) ******************************** >How does one replace these seals? I see part numbers >for them, but can't fathom how they're replaced. I >did read somewhere that the top bolts down to the >windscreen. Can I just lift up & slide the top seal >in? What about the bottom?
Barry Schwartz (San Diego) -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.375 / Virus Database: 267.14.22/239 - Release Date: 1/24/2006 Your messages not reaching the list? Check out http://www.team.net/posting.html === This list supported in part by The Vintage Triumph Register === http://www.vtr.org === Help keep Team.Net on the air === http://www.team.net/donate.html === unsubscribe/change address requests to [EMAIL PROTECTED] or try === http://www.team.net/cgi-bin/majorcool === Other lists available at === http://www.team.net/mailman/listinfo === Archives at http://www.team.net/archive === http://www.team.net/the-local === Edit your replies!
