Joe, Forgive me, what's a Rear Capper? Also, how are they mated to the inner fender?
I like the idea of cutting out what needs to be replace, but I do not know the extent of how much the fender was pulled out. It has an odd dent here & there. This makes me thing that it was pulled out a bunch so it might be hard to tell how to splice them back together?? Thanks again, Todd Bermudez '67 GT6 MKI Cincinnati, OH --- Joe Curry <[EMAIL PROTECTED]> wrote: > The wings are spot welded at the joint to the rear > deck on top and rear > valance on the rear. They are also welded (or > Braxed) onto the B Post. > > If the fenders are otherwise in good condition, you > might consider just > cutting off those flares and splicing in the > openings from the used fenders. > That would save the trouble of removing the rear > capper and replacing that. > > There is a crimping tool available at most body > supply stores that offsets > metal on splice panels so that it ends up being a > flush joint rather than a > lap joint. > > Joe > 333 > AZ > ----- Original Message ----- > From: "Todd Bermudez" <[EMAIL PROTECTED]> > To: "NASS Spitfire" <[EMAIL PROTECTED]>; > "Spitfire List" > <[email protected]> > Sent: Wednesday, February 08, 2006 8:47 AM > Subject: Rear Wing Replacement > > > > Hi all, > > > > OK, so I get this 1967 MKI GT6 for the wife. I've > > been sourcing bits from various places....somewhat > > successfully. > > > > I believe we're gonna need to replace the rear > wings. > > The lips (over the wheels) were rolled out in an > > effort to flare them to cover the wider wheels. > The > > wings are solid, but the edges don't look very > good. > > I think I've sourced a pair of used rear fenders. > > They're still attached to a car. I'm looking for > info > > on cutting them off...where are they welded? The > car > > they're coming off of will probably be scrapped so > > getting them off that car doesn't have to be > exact, > > but I'll need specific instruction on cutting them > off > > our car. > > > > Then reinstallation...are there tricks/tips that > > someone can pass along that's done it? > > > > Cheers, > > > > Todd Bermudez > > 1967 GT6 MKI > > Cincinnati, OH Tired of spam? Yahoo! Mail has the best spam protection around Your messages not reaching the list? Check out http://www.team.net/posting.html === This list supported in part by The Vintage Triumph Register === http://www.vtr.org === Help keep Team.Net on the air === http://www.team.net/donate.html === unsubscribe/change address requests to [EMAIL PROTECTED] or try === http://www.team.net/cgi-bin/majorcool === Other lists available at === http://www.team.net/mailman/listinfo === Archives at http://www.team.net/archive === http://www.team.net/the-local === Edit your replies!
