The bolt circle (pcd in the UK) is 4-on-3.75" - the 3.75" is measured from the center of one stud hole to the center of the opposite stud hole. I think the center hole needs to be 2.25" (from memory, check a stock wheel to be sure).
You'll want a small positive offset (10-15mm, probably) - large positive offset wheels (35-45mm) are for front wheel drive cars or use with 1" thick adapters. Negative offset will give it a low-rider look (wheels stuck way outside the fenders). M D "Doc" Nugent Renton, WA *USA* --- Grant & Cheryl <[EMAIL PROTECTED]> wrote: > I am on the hunt for some Panasport wheels for my '78 Spitfire. I > know I want > 13' X 5.5' but what are the other sizes? Offset? Bolt hole spacing? > I still have stock breaks etc. Tired of spam? Yahoo! Mail has the best spam protection around Your messages not reaching the list? Check out http://www.team.net/posting.html === This list supported in part by The Vintage Triumph Register === http://www.vtr.org === Help keep Team.Net on the air === http://www.team.net/donate.html === unsubscribe/change address requests to [EMAIL PROTECTED] or try === http://www.team.net/cgi-bin/majorcool === Other lists available at === http://www.team.net/mailman/listinfo === Archives at http://www.team.net/archive === http://www.team.net/the-local === Edit your replies!
