About installing snaps: At the very least, use a die-and-anvil kit, like the kind that comes with the "Dritz" brand snaps you can buy at fabric stores. They also sell a plier-like tool for installing snaps, but I got one and it stinks. The die and anvil (with a hammer) did a perfect job for me.
As for the male snaps on the body: You should probably replace all of them, especially if they are cracked, worn, got paint on them, etc. Just order a whole bunch of them. Doug Braun '72 Spit > Which brings me to the next question. Any good solid > instructions on how to install the button snaps? I > have not the slightest inkling on how to install the > buttons(especially the female ends) , and it looks > like you only have 1 shot at it. I noticed a few > "male" snaps on the car body are a bit loose. First > priority is to re-pop rivet those before installing > the ragtop-side snaps. Your messages not reaching the list? Check out http://www.team.net/posting.html === This list supported in part by The Vintage Triumph Register === http://www.vtr.org === Help keep Team.Net on the air === http://www.team.net/donate.html === unsubscribe/change address requests to [EMAIL PROTECTED] or try === http://www.team.net/cgi-bin/majorcool === Other lists available at === http://www.team.net/mailman/listinfo === Archives at http://www.team.net/archive === http://www.team.net/the-local === Edit your replies!
