> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:spitfires-
>
> I am not familiar with this Stromberg type carb.
> Thanks again...each time I have posted, several of you guys have been nice
> enough to reply!
Hi Andy,
If you've not done so already, be sure to fit a new rubber diaphragm in the
carb. One which has been sat unused is likely to be porous, even if there is
no visible hole. In this case the engine is likely to run fine at lower
revs, but won't go above about 3000rpm under load.
Cheers,
Bill.
Rarebits4classics
.......just what you've been looking for
PO Box 1232
Calne
Wiltshire
SN11 8WA
United Kingdom
http://www.rarebits4classics.co.uk
Your messages not reaching the list?
Check out http://www.team.net/posting.html
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
=== Help keep Team.Net on the air
=== http://www.team.net/donate.html
=== unsubscribe/change address requests to [EMAIL PROTECTED] or try
=== http://www.team.net/cgi-bin/majorcool
=== Other lists available at
=== http://www.team.net/mailman/listinfo
=== Archives at http://www.team.net/archive
=== http://www.team.net/the-local
=== Edit your replies!
