Is the whole care bare metal? If yes, bang out any dents and then shoot it with an epoxy primer or have someone do it for you. If it is just bare spots and you are going to do more work anyway then spray on any lacquer spray paint in a thin coat. You or the body shop will likely sand it back down to apply bondo to bare metal later. It is always good measure to spray a primer sealer coat just moments before the color coats to seal everything below so it wont bleed through, including rattle can primer. Rob
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This e-mail message from State Compensation Insurance Fund and all attachments transmitted with it may be privileged or confidential and protected from disclosure. If you are not the intended recipient, you are hereby notified that any dissemination, distribution, copying, or taking any action based on it is strictly prohibited and may have legal consequences. If you have received this e-mail in error, please notify the sender by reply e-mail and destroy the original message and all copies. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _______________________________________________ Spitfires mailing list [email protected] http://autox.team.net/mailman/listinfo/spitfires
