Found the problem. Two years ago I had the HS4s rebuilt, including teflon bushings on the throttle valve. While looking over the car Friday I found one of the teflon bushing has completely out place, one big air leak. Looks like I need to get the throttle bushing rebuilt again, but this time in brass, not teflon.
[EMAIL PROTECTED]
ox.team.net To:
[email protected]
Sent by: cc:
[EMAIL PROTECTED] Subject: Spitfires Digest, Vol
1, Issue 48
ox.team.net
09/03/2007 02:00 PM
Please respond to
spitfires
--- "Clark W. Nicholls" <[EMAIL PROTECTED]>
wrote:
> Are you sure there's no spark only on that cylinder?
> Check the points gap too.
> Try it on different dist cam lobes, see if it
> changes.
> If the distributor is worn and the shaft wobbles it
> could be worse on that
> one cylinder perhaps.
> I solved my worn distributor by installing the
> crane/Allison solid state
> system.
> Let us know!
_______________________________________________
Spitfires mailing list
[email protected]
http://autox.team.net/mailman/listinfo/spitfires
