I bought some from Vicky Brit
Thanks Jerry Stasyszen -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Doug Braun Sent: Tuesday, September 18, 2007 7:37 PM To: Harve Thorn; [EMAIL PROTECTED]; [EMAIL PROTECTED]; [email protected]; [EMAIL PROTECTED] Subject: Re: [Spits] Spitfire hardtop tie bar mountings needed Good luck. Those parts are ultra-rare. I have never seen any. For that application, I use the short bars along with 3-1/2" long bolts that will let the bars reach the mounting holes on the body. It does look a bit improvised, but the hardtop is much more secure and less squeaky with them installed. Doug Braun '72 Spit --- Harve Thorn <[EMAIL PROTECTED]> wrote: > I am looking for the tie bar mountings used to mount a factory hardtop > when the soft-top is not fitted. > > Part numbers are 624874(RH) and 624873(LH) (long tie bars vs. the > short ones used when the soft-top is fitted) > > See them at > http://www.rimmerbros.co.uk/spitfire/images/199a.gif > > Many tks any help! > > Harve Thorn > NASS #79 > _______________________________________________ > Spitfires mailing list > [email protected] > http://autox.team.net/mailman/listinfo/spitfires _______________________________________________ Spitfires mailing list [email protected] http://autox.team.net/mailman/listinfo/spitfires _______________________________________________ Spitfires mailing list [email protected] http://autox.team.net/mailman/listinfo/spitfires
