on the bonnet I used an all weather single quick connect from summit I did solder the pins Douglas A. Hansen www.1147cc.com
----- Original Message ---- From: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> To: [email protected]; [EMAIL PROTECTED] Sent: Friday, August 29, 2008 1:38:14 PM Subject: Re: [Spits] cleaning electrical bullet connectors That would make it rather hard to separate the bonnet from the car without cutting wires. Mark 73 MGBGT 76 TR7 80 Spitfire From: <[EMAIL PROTECTED]> Subject: Re: [Spits] cleaning electrical bullet connectors ..and if your don't care about originality, just function; then solder the wires together, and shrink-tube over the joint. Mike Mack 79 Spit 70 GT6+ 74 VW Thing _______________________________________________ Support Team.Net http://www.team.net/donate.html [email protected] http://autox.team.net/mailman/listinfo/spitfires http://www.team.net/archive _______________________________________________ Support Team.Net http://www.team.net/donate.html [email protected] http://autox.team.net/mailman/listinfo/spitfires http://www.team.net/archive
