At 10:32 AM 12/26/2008, Todd Bermudez wrote:
Aside from spring issues, I noticed that the PO
installed a 7 lb radiator cap which would be stock on
a GT6 mk1 application. However the engine is a MK2
engine and I think it has domed pistons...it goes
really well! I noted that the parts books all call
for a 13 lb cap. Would this help cool the system
better? I ran hot all summer long so of course I ran
the heater! Thank goodness for those CLOTH Miata
seats! Oh, we picked up a radiator shroud from
Spitbits. I'm hoping that will help. I haven't
installed that yet. Nigel told me it installs on the
engine shields. Unfortunately, I don't have those.
Anyone have extras? I'm quite certain, I can
fabricate something if I had something to work from.
Make sure you check the temp with a calibrated gauge before you get
too excited. I have several gauges and senders, and found that I
could make the gauge read anywhere from 1/4 to 3/4 depending on
exactly which combination I used!
Kevin Rhodes
Westbrook, ME
Freddy the '74 Spitfire
Freddy's new older sister - '69 Saab Sonett #1243 - winter project
_______________________________________________
Support Team.Net http://www.team.net/donate.html
[email protected]
http://autox.team.net/mailman/listinfo/spitfires
http://www.team.net/archive
