You don't it with a gasket, you use it instead of a gasket. Hylomar doesn't dry and stick. Using it with a gasket results in the gasket not being held in place, and the gasket much more easily can be blown out.
>From the technical data sheet: "Hylomar Universal Blue should be applied to clean dry surfaces. Apply a thin film or bead to one or both surfaces. Once applied, sufficient time should be allowed for the solvent to evaporate. Unlimited assembly time allows precise alignment of joints to be made. Due to the nature of the compound, fasteners may be required to be re-tightened to the correct torque." http://www.hylomar-usa.com/_resources/_pdf/Hylomar_Univ_Data.pdf _______________________________________________ Support Team.Net http://www.team.net/donate.html [email protected] http://autox.team.net/mailman/listinfo/spitfires http://www.team.net/archive
