--- On Sun, 2/15/09, Rob T. Getzinger <rtgetzin...@scif.com> wrote: > From: Rob T. Getzinger <rtgetzin...@scif.com> > Subject: [Spits] Upper wishbone bush install > To: "Spitfire list" <spitfires@autox.team.net> > Date: Sunday, February 15, 2009, 7:11 PM > There is always at least one bolt that rust solid into the > front suspension > bushings. I had to cut mine out after trying everything > else. I tried using a > vise to push in a new bushing and it bulged and then > wouldn't budge in > further. I tried using grease and still only slight > movement with a bulge in > the rubber keeping it from going in further. > What is the method to install stock busings back into the > upper wishbone? > Thanks, > Rob > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > ~~~~~~~~~~~~~~~~~~~~~~~~~~~ > This e-mail message from State Compensation Insurance Fund > and all attachments > transmitted with it > may be privileged or confidential and protected from > disclosure. If you are > not the intended recipient, > you are hereby notified that any dissemination, > distribution, copying, or > taking any action based on it > is strictly prohibited and may have legal consequences. If > you have received > this e-mail in error, > please notify the sender by reply e-mail and destroy the > original message and > all copies. > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > ~~~~~~~~~~~~~~~~~~~~~~~~~~~ > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > Spitfires@autox.team.net > http://autox.team.net/mailman/listinfo/spitfires > > http://www.team.net/archive _______________________________________________
Support Team.Net http://www.team.net/donate.html Spitfires@autox.team.net http://autox.team.net/mailman/listinfo/spitfires http://www.team.net/archive