Same as for the lower wishbone :-) I have always used a puller made from a long bolt and a bunch of various-sized washers, and the bushings always went in OK.
Is the hole where the bushing goes reasonably clean and smooth? Instead of grease, it would be better to use a water based lubricant. You want something that will eventually wash away so the rubber bushing will not permanently slide in the hole. Your local pharmacy will have something suitable :-) Alternatively, dish soap (or "washing up liquid"as they say in Britain) should work well. Doug Braun '72 Spit --- On Sun, 2/15/09, Rob T. Getzinger <[email protected]> wrote: > From: Rob T. Getzinger <[email protected]> > Subject: [Spits] Upper wishbone bush install > To: "Spitfire list" <[email protected]> > Date: Sunday, February 15, 2009, 7:11 PM > What is the method to install stock bushings back into the upper wishbone? _______________________________________________ Support Team.Net http://www.team.net/donate.html [email protected] http://autox.team.net/mailman/listinfo/spitfires http://www.team.net/archive
