Hi Daniel, The inner rocker panel (sill) has a flat bottom to it and is welded to the floor. The centre rocker panel's (membrane) bottom edge is welded to the floor's turned down edge.
I just did this last year and have a few pictures of this area if you are interested. Mark Subject: [Spits] Floor Pan replacement Further inspection shows that the replacement pan outside edge is straight from front to back and there is a turned down edge. I appears that the Inner Rocker Panel is getting in the way. My inner and outer rocker panels appear to be ok and will not need replacement (at far as I can tell). So the question is, do I have to remove the Inner Rocker Panel to get to the floor pans, or can I (or should I) cut the old floor along the Inner Rocker Panel and bend the replacement floor panel upward to be tack-welded to the Inner Rocker Panel? _______________________________________________ Support Team.Net http://www.team.net/donate.html [email protected] http://autox.team.net/mailman/listinfo/spitfires http://www.team.net/archive
