I got a set of the Tex door mirrors from TRF. I really don't like the way they attached to the door or the way the mirror stem attaches to the mounting plinth. I can overcome the first problem by bolting through the door metal rather than using the plastic plugs but I can't really modify the way the stem mirror mounts. Has anybody with has these mirror had a issue with the mirror stem either falling off the plinth or being inadvertenly knocked off by a passerby? The mounting seems very weak to me. All the catalogues show a seal which goes around the entire door opening right up to the top of the A post. Then there is a separate A post seal. The seals I got have pretty big round hollow rubber seals. When I put the door opening seal on it touches the window glass more or less rendering the A post seal superfluous. Are you supposed to cut off the rubber seal from the door opening seal where is goes up the A post and then put the A post seal on. There sure doesn't look ike there is room for both I appreciate any advice Stuart Greenwood 71 MKIV Spit and 71 MKI Stag
Stuart a Greenwood 71 Mk IV Spitfire, 71Mk 1 Stag _______________________________________________ Support Team.Net http://www.team.net/donate.html [email protected] http://autox.team.net/mailman/listinfo/spitfires http://www.team.net/archive
