Listers, I am in a bit of a quandary. In my quest to restore my 1970 GT6+ to its almost showroom/as it left the dealer condition for Triumphest/VTR, I need a bit of assistance. I have managed to find an original steering wheel and mounting boss/hub to replace the Lecarra for the show (apparently the hub/boss has no separate part number, but is part of 160038 steering wheel and pad assy for those so inclined) but it has somehow lost a crucial piece. The part I am referring to is a small, pressed on metal flanged ring, pressed onto the central casting of the hub that the horn button mounts into. This flanged piece secures the mounting pad to the assy when you press the pad over the flange. Now, I can make a new flanged piece, but I need the dimension from the top edge of the casting it's pressed on to, to the top edge of the flange as installed on the hub. Also the outer diameter of the flange itself. If anybody has a hub/boss lying around, or a column without the pad and horn button mounted, that could take a couple of measurements for me I would really appreciate it any pre 76 Spitfire/GT6 or TR6 should be the same as far as this part is concerned
Thanks - -------------------------------------------------------------------- mail2web.com What can On Demand Business Solutions do for you? http://link.mail2web.com/Business/SharePoint _______________________________________________ Support Team.Net http://www.team.net/donate.html [email protected] http://autox.team.net/mailman/listinfo/spitfires http://www.team.net/archive
