On 9 Aug 2009 at 17:16, [email protected] wrote: > after some consideration I decided that the rotoflex axle would be > a pain to remove to properly install the u-joint w/o that special > Churchill tool required to support the spring load even if I towed > it back to TRF.
Glad you got the car back on the road and no serious harm was done. You're lucky the free inner end didn't bang around and break something, though I guess the frame elements there don't let it contact much that is breakable. I don't understand the bit about a Churchill tool and spring load. I honestly can't recall whether I've ever pulled the GT6 rear apart but I think I have because I remember clearly the six diff studs compared to the Spitfire's four. I have certainly pulled the Spitfire apart several times. I can't see any reason why removing the halfshaft and hub as a unit from a GT6 should be all that different if all you need is access to the u-joint at the inner end. What's the issue? -- Jim Muller [email protected] '80 Spitfire, '70 GT6+ _______________________________________________ Support Team.Net http://www.team.net/donate.html [email protected] http://autox.team.net/mailman/listinfo/spitfires http://www.team.net/archive
